Tag Archives: transceiver

Finisar FTLX1471D3BCL RoHS-6 10Gbps 10km Single Mode Datacom SFP+Transceiver

Robin Tepper with Northwest Remarketing has for Sale:

250 – NEW FTLX1471D3BCL Finisar 10Gbase-LR SFP+ @ 190.00 each New Bulk Pack.

$_57 (1)
*These are packaged 36 total in a New Clam Shell. So if you buy less then 36 the SFP+ will be pulled from the clam shell and packaged in a Antistatic bag.

  • Hot-pluggable SFP+ footprint
  • Supports 9.95 to 10.5Gb/s bit rates
  • Power dissipation < 1W
  • RoHS-6 compliant (lead-free)
  • Commercial temperature range -5°C to 70°C
  • Single 3.3V power supply
  • Maximum link length of 10km
  • Uncooled 1310nm DFB laser
  • Receiver limiting electrical interface
  • Duplex LC connector
  • Built-in digital diagnostic functions

Finisar’s FTLX1471D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1471D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.

 

90 Day Hardware Warranty.

Free Fedex Ground Shipping in the lower 48 States.

For any questions you may have, feel free to call M-F 9:00-5:00 PST (503) 391-8191 ext. 118 or robin@nwrusa.com

 

For more information, please click here.

 

Robin Tepper

NW Remarketing

360 Belmont St NE

Salem, OR 97301

(503) 391.8191 x 118

(503) 551.2596 cell

(503) 375.8470 Fax

robin@nwrusa.com

robint@wvi.com

AIM: robintNWR

 

NEW FTLX1471D3BCL Finisar 10Gbase-L SFP+ for sale at Northwest Remarketing.

 

Spirent Smartbits SMB6000C XFP-3730A 10GXFP LAN-3324A Bundle /kurt@nwrusa.com

Northwest Remarketing and Kurt Paulus  has For Sale:

 Spirent Smartbits SMB6000C XFP-3730A 10G XFP LAN-3324A Smartmetrics for US $18995.00 with a 90 Day Warranty.

$T2eC16J,!zEE9s3!(HecBR5ItEtHEw~~60_57 $T2eC16d,!zQE9s3stYFqBR5ItLiBv!~~60_57 $T2eC16J,!)8E9s4l5-g3BR5ItS,Ij!~~60_57

If you have any questions about this equipment please feel free to call me @ 503.391.8191 x 114 . I am available to answer your questions 8-5 PST.

Free Shiping If You Elect To Buy It Now!

Items ship same day on credit card transactions (contingent upon credit card address).

This unit is tested working in great shape and comes to you with a 90 day hardware warranty. This posting includes the following:

1 x Spirent Smartbits SMB-6000C – 12 Slot Performance Analysis System

1 x Spirent XFP-3730A – SmartMetrics 10 Gigabit Ethernet XFP MSA Module

1 x Spirent Smartbits LAN-3324A – 10/100/1000 Mbps and Gigabit Ethernet Fiber, 4-port, SmartMetrics XD module

SmartBits 6000C (SMB-6000C) chassis is the industry’s highest-port-density network performance analysis test system. Each chassis can support up to 12 slots of a wide variety of test modules to suit port density and technology needs. SmartBits 6000Cs can be interconnected to achieve ultra high-port density, enabling users to perform auto-mated large scale testing in Quality Control and high-volume production environments. Up to 8 chassis can be synchronously connected together using a simple cable; this can be extended up to 512 chassis using SmartBits multi-chassis extension units. The SMB-6000C is easily controlled by a host computer through a 10/100 Mbps Ethernet connection and uses a Windows®, Linux, or Solaris-based interface.

* Can be daisy-chained together to achieve large scale testing
* Holds up to twelve modules
* Supports up to 96 10/100 Ethernet ports, 48 Gigabit Ethernet ports, 6 10GbE ports, 24 POS ports, 24 Fibre Channel ports, or a combination of these port types
* Bundled with three PC-based software applications for comprehensive stress testing
* performance tests defined in RFC 1242 and RFC 2544. Supports a 10/100 Mbps Ethernet or Telnet connection to the host PC
* Provides GPS (Global Positioning System), NTP (Network Timing Protocol), and CDMA (Code Division Multiple Access) TIA/EIA–95B, external timing reference support
* Supports multi-user operation

The Spirent SmartBits XFP-3730A is SmartMetrics™ and TeraMetrics™ 10 Gigabit Ethernet (10GbE) XFP-MSA-based test modules used to measure the performance and test the interoperability of networking devices. TeraMetrics modules feature a dedicated Pentium™ processor that provides integrated and highly scalable control and date plane performance testing. TeraMetrics enables you to test applications from Layer 2 to 7. SmartMetrics provides a complete suite of Layer 2 and Layer 3 test capabilities at a lower cost per port than the TeraMetrics version. Each module complies with the IEEE 802.3ae standard specification.

The Spirent SmartBits LAN-3324A TeraMetrics XD modules offer Dual Media Ethernet connections on every test port. The user can select a 10/100/1000 Mbps connection or a Gigabit Ethernet Fiber connection on each port. Each XD module can simulate the millions of clients and servers necessary to fully stress test a device or network. The SmartBits test system can scale from 2 ports up to 768 test ports. Requires SFP Transceiver for Gigabit Ethernet Fiber testing, order ACC-6025A for Multimode (850 nm) or ACC-6026A for Singlemode (1310 nm).

For more information, please click here.

NOTE: No software of any kind (external or internal) is provided with the Hardware. Please contact Spirent to obtain software license rights and maintenance support.

 

Kurt Paulus

NW Remarketing

503-391-8191 x114

503-881-3578 Direct

503-375-8470fax

AOLIM: kurtnwr

kurt@nwrusa.com

 

Spirent Smartbits SMB6000C XFP-3730A 10GXFP LAN-3324A Bundle for Sale at Northwest Remarketing.